Stanton C.503 - Manual (Page 9)

returns the CUE point again (Stutter play). At this time (playing with holding the CUE Button), pressing the PLAY Button
enters into the normal playback mode.
Pressing and holding the SHIFT Button then pressing this Button toggles the AUTO CUE function on and off.
26. MEMORY/CUE [MEMO/INS] Button
Activates the three buttons below (1/IN, 2/OUT, and 3/RELOOP) ready for CUE mode. When these three buttons are set
to CUE mode, this button will light green, press again to SET cue for bank 1, 2, or 3. NOTE: > Pressing and holding the
SHIFT then pressing MEMORY/CUE enters the track memory store mode (MEMO/INS).
NOTE:
Memory store mode allows the user to store track memory in several banks (A – E). For more information on memory
store mode see section 3-4 Track Memory.
When unit is in program edit mode, pressing this button inserts a program track.
For more information on the insert function see section 3-8 Program Play.
27. LOOP [REPEAT/DEL] Button
Enters the three buttons (1/IN, 2/OUT, and 3/RELOOP) ready for LOOP mode. When these three buttons are set to
LOOP mode, this button will light. When loop play is engaged, pressing this button exits the loop play. Pressing and hold-
ing SHIFT then pressing this LOOP changes the repeat mode on or off. When repeat mode is set to single repeat, “SGL”
and “RPT” indicators in the LCD will light. When repeat mode is set to all repeat, only “RPT” indicator will light. When
unit is in program edit mode, pressing this button deletes a program (track).
28. 1/IN Button
29. 2/OUT Button
30. 3/RELOOP Button
These three buttons have the following three functions:
CUE mode: Store the in CUE points or play them seamlessly.
SAMPLER mode: Create the IN & OUT points of a Sample, and playing it.
LOOP mode: Create the IN & OUT points of a Loop, and re-loop.
31. PITCH LOCK
Sets the pitch range to 0%. At this time, TEMPO display shows “- - -“ and LED that is placed in center of the pitch fader
will light, even if Pitch Fader is not located to the center. This indicates the Pitch has been “Locked” at zero.
NOTE:
When PITCH LOCK button is pressed, KEY SHIFT and KEY LOCK functions are turned off automatically.
32. PITCH BEND
Use these buttons to perform pitch bending.
33. Pitch Fader
Changes the playback pitch, according to the range set by PITCH RANGE button. When playback pitch is set to 0% or
PITCH LOCK is turned on, the LED will light.