Stanton C.503 User Manual
Page 10
1-4. Remote Controller (Bottom Panel)
34. REMOTE connector
Connect this to the REMOTE connector on the rear panel of the main unit.
WARRNING
* DO NOT use any cable except the cable supplied with the C.503.
* Connect the cable to the C.503 as shown on the illustration on the rear panel. If you connect the cable in any
other way, you may damage the C.503.
1-5. LCD
35. M indicator
If there is track memory data for the current selected track in the current selected memory bank, this indicator lights.
36. TRACK indicator
Shows the current track selected / playing.
37. REMAIN indicator
When the time mode is set to time remaining mode, this indicator lights.