Speco Technologies 10X Pan-Tilt Speed Dome Camera HITSD10X - Manual (Page 22)

22
H. PATTERN SET
8 programmable patterns are available with 16 characters of title.
After setting the data to each pattern # 1~8, 81~88+ preset buttons are working as Pattern # 1~8.
H-1. PATTERN SET –PATT NO.
Up to 8 programmable user-defined patterns set by the joystick are available.
H-2. PATTERN SET –PATT TITLE
To set PATTERN TITLE, select up to 16 characters using Joystick to the left or right.
Press ZOOM TELE button moves to the next character from the left to the right direction and
ZOOM WIDE button moves to the next character from the right to left direction (Space displays
when
H-3. PATTERN SET –DATA FILL
To fill the programming data, press FOCUS FAR button in order to start the data fill up. Filling data
is programmed according to the joystick movement. Press FOCUS FAR button again in order to
escape.
H-4. PATTERN SET –SAVE
To saving the memorized data, move the joystick to the right when the cursor is on SAVE. Then the
cursor moves to the PATT NO.02 in order to prepare next pattern no.
H-5. PATTERN SET –EXIT
To escape this page, move joystick to the right
OSD MENU SETTING
PATTERN SET
PATT NO : 01
PATT TITLE: PATTERN01 □□□□□□□
DATA FILL : 0%
SAVE
EXIT
DEFAULT SETTING