Speco Technologies 10X Pan-Tilt Speed Dome Camera HITSD10X - Manual (Page 18)

18
D. PRESET SET
To enter PRESET SET, move the joystick to the right direction.
D-1. PRESET – PRESET NO.
Up to 164 numbers of preset positions are available. Move joystick to the right or left direction to
select a preset no.
D-2. PRESET – PRESET ID
To set preset ID, select up to 16 characters using Joystick to the left or right.
Press ZOOM TELE button moves to the next character from the left to the right direction and
ZOOM WIDE button moves to the next character from the right to left direction
(Space displays when
D-3. PRESET – PAN: XXX.X TILT: XX.X
Press FOCUS FAR button in order to set the preset position, then use the joystick to move the
camera to the position where the memorized preset no. is needed. Then press FOCUS FAR button
again after setting a preset location.
D-4. PRESET – SAVE
Move the joystick to the right when the cursor is at SAVE and then the cursor will be located on the
Preset ID for the continuous preset No. setting.
D-5. PRESET – EXIT
To escape this page, move joystick to the right .
PRESET SET
PRESET NO :001
PRESET ID :PRESET001-------
PAN :XXX.XX TILT : XXX.XX
SAVE
EXIT
DEFAULT SETTING
OSD MENU SETTING