Sony CFD-370 - Manual (Page 19)

The Timer
The Timer
19
CFD-370.E_3-858-522-6X.U/CA/AU6/TW
Setting the clock
Before you set the clock, insert four size
AA (R6) batteries and connect the AC
power cord (see pages 23 and 24.)
Before you set the clock, “AM 12:00”
flashes.
The Timer
CLOCK/TIMER
1
Press CLOCK/TIMER until “CLOCK” appears on
the display.
2
Press CLOCK/TIMER for about 2 seconds until
the hour digit flashes.
The “AM” or “PM” indication also flashes.
3
Press TUNING/TIME SET +/– until you set the
current hour. Then press DISPLAY/ENTER.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET +/– until the correct
minute is displayed.
4
Press DISPLAY/ENTER.
The clock starts from 00 seconds.
DISPLAY/ENTER TUNING/TIME
SET +/–
/