Sony DAV-HDX686W - Manual (Page 27)

27 US
Ge
tting Star
te
d
This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system,
perform this connection.
Method 1: Audio cord (D) connection
This is the basic connection and sends an analog audio signal.
Method 2: Digital optical cord (E) or digital coaxial cord (F) connection
When the TV has a digital optical or coaxial output jack, you can improve sound quality by connecting
with a digital optical or coaxial cord in addition to an audio cord connection.
Note
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL
has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after 2 seconds.
Tip
• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV/VIDEO
(AUDIO IN R/L) jacks or DIGITAL IN OPTICAL/COAXIAL jacks instead of the TV.
Connecting the TV (Audio connection)
CENTER
SUBW OOFE R
FRONT R
FRONT L
SPEA KER
HDM I OUT
SPEA KER
COAXIAL 75
AM
FM
ANTE NNA
DMP ORT
DC5V
0.7A M AX
AUDIO IN
P B /C B
P R /C R
Y
L
R
VIDEO OUT
TV/VIDEO
COM PONE NT VI DEO OUT
DIGITAL IN
COAXIAL
OPTICAL
TV
EZW- RT10
To the digital optical out
jack of the TV.
To the audio out jacks of
the TV.
D Audio cord (not
supplied)
E Digital optical cord
(not supplied)
To the digital coaxial out jack of
the TV.
F Digital coaxial cord (not
supplied)