Sanyo VCC-WB2000P - Manual (Page 39)

Alarm Setting
8 PRIORITY setting
This sets the image quality for alarm recording.
•
PICTURE QUALITY
Alarm images are recorded at high quality.
•
TIME
Alarm images are recorded at normal quality.
* The time used for recording alarm images
becomes interval shorter.
9 ALARM RESOLUTION setting
This sets the resolution that is to be used for
recording alarm images.
The default setting is “720x240”.
F OVERWRITE setting
If this is set to “ON” while a memory card is
inserted, old alarm data is erased and new data
is recorded over the top.
MOTION DETECTOR SET Settings
1
Click the [ALARM] button in the main
menu.
The ALARM SET screen will be displayed.
2
Set MOTION DETECTOR to “ON”.
The MOTION DETECTOR SET screen will
be displayed.
3
While looking at the screen, move the
pointer to the motion sensor detection
area and click with the left mouse button.
A sensor mark ( ú ) will appear in the
detection area (grid).
Set other sensor marks in the detection area
in the same way.
Note: If you click on a sensor mark that has
been set, it will be cleared.
4
Click the [SET] button.
2
4
3
6
7
5
ID3
– 38 – English