Seal-a-Meal VS125-S - Manual (Page 5)

CARE AND CLEANING
Cleaning your Vacuum Food Sealer
•
Always unplug the unit before cleaning.
• Always remove from wall mounted position prior to cleaning.
• Do not immerse in water
• Do not use abrasives to clean the unit.
For White, Black or other non-Chrome finishes:
•
Wipe the outside of the unit with a damp cloth and soap.
For Chrome finish:
•
Lightly spray a soft, clean cloth with a no wax formula furniture polish.
• Lightly rub the outside surfaces (such as the lid) to remove fingerprints and restore the finish.
Note: Do not use no wax formula furniture polish on inside of unit or on plastic parts.
CAUTION: Do not immerse the Vacuum Food Sealer in water or other liquid.
Cleaning the Sealing Foam
Use a warm damp cloth with mild dish soap to remove any liquid or food particles that are on the
surface of the foam.
Cleaning the Removable Lock ‘n Seal™ Nozzle/Drip Tray
The Seal-a-Meal
® Vacuum Food Sealer is equipped with a Removable Lock ‘n Seal™ Nozzle/Drip
Tray to trap any liquid that may be drawn from the bag. The Lock ‘n Seal™ Nozzle/Drip Tray
contains Microban
® antimicrobial product protection, which inhibits the growth of stain and odor
causing bacteria and keeps the unit cleaner between cleanings. Normal cleaning practices should
be maintained. Does not protect user from food borne illnesses.
HOW TO SEAL BAGS WITHOUT VACUUMING (CONT.)
3. Firmly press down on both sides of lid making sure both sides are locked.
Note: Sealer will not operate if Lid is not properly closed.
4. Press and hold Seal Button. Red Indicator Light will turn off when the seal is complete.
5. Push in Lid Release Buttons to open Lid.
Warning: Even though the Sealing Strip is not powered when Lid is open, it may still be hot.
CAUTION: This Vacuum Food Sealer is not for commercial use. If sealing more than 30 bags or
canisters in a row, wait at least 25 minutes before continuing to use your Vacuum Food Sealer.
Vacuu m Sea l
Vacuu m Sea l
-9- -8-
HOW TO VACUUM SEAL WITH SEAL-A-MEAL ® ACCESSORIES
1. Open Lid
2. Pull Lock ‘n Seal™ Nozzle Lever forward to release nozzle. Remove Nozzle and carefully set aside.
3. Firmly insert male end of accessory hose into Accessory Port.
4. Attach other end of hose to Seal-a-Meal ® accessory.
5. Press and hold the Vacuum Button. Red Vacuum Indicator Light will turn on. Once all of the
air is removed, the Sealer and Indicator Light will automatically turn off.
To stop the vacuum process at any time, press the Vacuum Button.
HOW TO VACUUM SEAL DELICATE OR MOIST FOODS
Sealing Delicate Foods:
To seal delicate foods such as muffins or pastries, you have the option to bypass the auto-seal
function. Simply press the Vacuum Button immdeiately followed by the Seal Button and the vacuum
pump will stop as the bag is sealed. This will prevent soft foods from being crushed.
Hint: For best results freeze foods that are soft, such as muffins, cakes and pies etc. so they maintain
their shape when vacuum sealed.
Sealing Moist Foods:
When sealing moist foods, such as sauces or stews, you have the option to instantly seal the bag and
bypass the auto-seal function if you see any liquid being drawn from the bag or whenever you believe the
process is complete. Simply press the Vacuum Button immediately followed by the Seal Button and the
vacuum pump will stop as the bag is sealed.
Hint: For best results liquids should be frozen prior to vacuum sealing. Remove excess juices before
sealing whenever possible.
HOW TO SEAL BAGS WITHOUT VACUUMING
1. Place item to be sealed in pre-cut or custom sized bag.
2. Place bag at least 1/2" above the Sealing Strip. Make sure bag is straight (with no wrinkles) and
close Lid.
Vacuum
Seal
VS125(428-1250) V.qxd 1/10/05 16:25 Page 9