Soundstream Technologies SA.244 - Manual (Page 4)

2i
Underside
View
1.
2.
3.
4.
5.
6.
7.
8.
9.
IO.
11,
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24
Key to Cailouts
Connected to fuse or circuit breaker, then battery’s positive post.
Ground Main ground connection. Bolt to a clean chassis ground in the
vehicle.
Remote Remote turn-on input from the head unit. Accepts
LED Indicates amplifier power on.
Speaker Output Connections Channels 1 & 2
High Pass Crossover Output Low level high pass outputs to auxiliary
amplifier.
Bass EQ Adjustable bass equalization circuit, 0 to
boost at 45
Hz-Channels 1 2.
Input Level Variable from
to 1 2.
Inputs Right and left channel inputs; only right channel input used in “Mono”
mode-Channels 1 2.
Speaker Output Connections Channels 3 4
Low Pass Crossover Output Low level low pass output to auxiliary amplifier.
Bass EQ Adjustable bass equalization circuit, 0 to boost at 45
Hz-Channels 3 4 low pass output.
Input Level Variable from
to 3 4.
Inputs Right and left channel inputs; only right channel input used in “Mono”
mode-Channels 3 4.
[underside] Main Fuse Main power supply fuse. Replace only with same fuse
value.
[underside] Xover Crossover frequency settings for amplifier and
outputs-channels 1 2 8 high pass and low pass outputs.
[underside] Xover Crossover frequency settings for amplifier and
outputs-Channels 3 4 low pass outputs.
[underside] Stereo/Bridged Mono Switch Select “Mono” for bridged
operation (use only right channel input) or “Stereo” for 2-channel Stereo or
Mixed Mono operation; See crossover section for more details-Channels 1 2.
[underside] Amplifier Crossover Switch Select high pass, low pass, or full
range operation-Channels 1 & 2.
[underside] Bass EQ Switch
On/Off switch for bass equalization
circuit-Channels 1 2.
[underside] Stereo/Bridged Mono Switch Select “Mono” for bridged
operation (use only right channel input) or “Stereo” for
Stereo or
Mixed Mono operation; See crossover section for more details.
[underside] Amplifier Crossover Switch Select high pass, low pass, or full
range operation-Channels 3 4.
[underside] Bass EQ Switch
On/Off switch for bass equalization
circuit-Channels 3 4.
[underside] Input Select Selectable inputs from internal (from channels 1
2) or external.