Samsung 240MP - Manual (Page 15)

English 13
English
Français
Deutsch
Español
Portuguese
Italiano
■ Fine
■ Coarse
Although "Auto Adjustment" automatically finds the
optimum values of FINE and COARSE parameters as well
as image position, it may be necessary for you to adjust
those parameters manually. It is recommended for you to
use "Auto Adjustment" first. If the adjustment results are
not satisfactory, then use COARSE and FINE adjustment
features to get the best adjustment results. Bear in mind
that COARSE and FINE adjustments may change the
width of the image and affect image position as well. If
the image is clear while out of center by a couple of
pixels, use image position to center the image.
■ Reset Image lock and position parameters are replaced with
the factory default values.
PC Position ■ Changes the location of the image.
■ In case of the image is off center, use this function to
center the image.
■ It work only with PC source.
■ H-Position “–CH” : Move to the Left
“CH+” : Move to the Right
■ V-Position “–CH” : Move to the Bottom
“CH+” : Move to the Top
Table 1. Screen controls ( Continued )
Icon
Menus and
Sub-menus
Function Descriptions
– +
Adjusting Your LCD Monitor
4_E240MP3p.fm Page 13 Monday, August 13, 2001 11:08 AM