SVAT Electronics UC1700 - Manual (Page 10)

UC1700 7
SVAT ELECTRONICS
Now You Can See
4) The screen display shows the recorded images by value of frames.
5) The screen display shows the recorded images by percentage (0% - 100%)
When the memory is full and the “Full Stop-Overwrite” switch on the front panel
is switched to “Overwrite”, the word “LOOP” will be shown.
STOP MODE
Under stop mode, the camera will not proceed to record.When a monitor has been
connected, the user may view images through the monitor.
Under this mode Press <<
•
>> button, to enter RECORD, Press << >> button to enter
PLAYBACK mode, Press <<MENU>> button to enter SETUP mode.
1) Date
2) Time
3) Recorded frames per second
4) System free space; range: 0%-100% When the memory is full (0%) and “Full Stop
Overwrite” switch is switched to “Full Stop”, the word “FULL” will be shown or
switched to “Overwrite”, then the word “LOOP” will be shown.
PLAYBACK MODE
After entering PLAYBACK mode the system automatically playbacks previously recorded video.
S T O P 2 00 4 / 04 / 07 12 : 1 0 : 1 0
1 90 93 . 4 %
(1) (2)
(3) (4)