Sony STR-DB2000 - Manual (Page 27)

27 GB
Am
plifie
r O
p
erati
o
n
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Rotate INPUT SELECTOR to select
“FM” or “AM”.
2
Tune in the station that you want to
preset using Automatic Tuning
(page 25) or Direct Tuning (page 26).
Switch the FM reception mode if necessary
(page 25).
3
Press MEMORY/ENTER.
“MEMORY” appears in the display for a
few seconds. Do steps 4 to 5 before the
display goes out.
4
Press PRESET TUNING + or PRESET
TUNING – to select a preset number.
If you want to switch the memory page,
press SHIFT on the remote.
If “MEMORY” goes out before you select
the preset number, start again from step 3.
5
Press MEMORY/ENTER again.
The station is stored to the selected preset
number.
If “MEMORY” goes out before you press
MEMORY/ENTER, start again from step
3.
6
Repeat steps 2 to 5 to preset another
station.
Tuning to preset stations
1
Rotate INPUT SELECTOR to select
“FM” or “AM”.
2
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Each time you press the button, you can
select the preset station as follows:
Using the remote
1
STR-DA2000ES:
Move the easy scroll key to select “TUNER”,
then press the key repeatedly to select “FM”
or “AM”.
STR-DB2000:
Press TUNER repeatedly to select FM or
AM.
2
Press D.SKIP/CH/PRESET +/– repeatedly
to select the preset station you want.
Presetting radio stations
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T