Sony CDU625 - Manual (Page 16)

16
■ DC INPUT connector
The power supply cable recommended are those using an AMP
1-480424-0 housing and 170147-1 or 170120 contacts. The pin
assignment is as follows.
After matching the beveled edges, insert the plug of the power
supply cable to the DC INPUT connector and push it firmly in place.
Caution: Improper connection may damage the drive and void the
warranty.
■ AUDIO OUT connector
The audio output cable recommended are those using a Molex
08-50-0113 or 08-50-4114 contacts and a 22-01-3047 housing. The
pin assignment is as follows:
Installing the Drive in Your Computer
GND GND
+5 V DC
DC INPUT connector
Power supply cable
(4-pin connection cable)
GND GND
Right signal Light signal
+12 V DC