Sony CDX-C610 - Manual (Page 16)

16
Actual total number: Sony CDX-C610 (E) 3-856-122-42(2)
EN
Adding tracks to the program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*FULL*” appears
in the display, and you cannot insert tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
Erasing the tracks in the program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1“ above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Program 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
SUR
PLAY MODE ENTER
DISC TRACK
4
CD2
EQ
7 P108
Track slot number
µ
SUR
PLAY MODE ENTER
DISC TRACK
-
DEL
EQ
-- P106
SUR
PLAY MODE ENTER
DISC TRACK
4
CD2
EQ
7 P106
SUR
PLAY MODE ENTER
DISC TRACK
3
CD2
EQ
2 P105
track slot number
SUR
PLAY MODE ENTER
DISC TRACK
3
CD2
EQ
3 P106
SUR
PLAY MODE ENTER
DISC TRACK
3
CD2
EQ
2 P107