Samson 215 - Manual (Page 10)

8
S curve 215 System Configurations
Using the S curve 215 with Active Speakers
In this example the mixer’s left and right outputs are connected to the S curve 215’s Channel 1 and Channel 2 inputs. Then, the S curve 215’s
Channel 1 and Channel 2 outputs are connected to the inputs of the active (self-powered) loudspeakers.
Using the S curve 215 with Passive Speakers
In this example the mixer’s left and right outputs are connected to the S curve 215’s Channel 1 and Channel 2 inputs. Then, the S curve 215’s
Channel 1 and Channel 2 outputs are connected to the inputs of a 2-channel power amp. Next, the power amplifier’s outputs are connected
to the passive (non-powered) loudspeakers.