Sharp MD-M1H - Manual (Page 39)

38
■ Erase
To erase all of the tracks at once:
1
Press the ■ button.
● The total number of tracks and the total playing
time on an MD will appear.
2
Press the NAME/TOC EDIT button, and within
10 seconds, select “ALL ERASE” pressing the
or button.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the ■ button.
4
Press the ENTER button again.
● All of the track numbers and track names will be
erased.
Note:
● This function cannot be used in the random play
mode and APMS play mode.
To erase tracks one at a time:
1
Whilst in the stop mode, select the track you
want to erase pressing the
5 3
or
2 4
button.
Or start playing the track to be erased, and then
press the
0 6
button.
2
Press the NAME/TOC EDIT button, and within
10 seconds, select “ERASE” pressing the
or button.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the ■ button.
4
Press the ENTER button again.
● The track is erased, and the unit is stopped at
the beginning of the next track.
Notes:
● Once a track has been erased, it cannot be
recovered. Double-check the track number
before erasing it.
● When a track is erased, the numbers assigned
to the tracks following the erased track will be
automatically decreased by one.
● When a track is erased, the track name will be
erased at the same time.
● This function cannot be used in the random play
mode and APMS play mode.
3,4
H
1
2
1
2
(Remote control operation)
3,4
1
2
2
(Remote control operation)
■ All Erase
(Continued)