Sharp MD-M1H - Manual (Page 24)

23
(Continued)
6
Whilst the selected programme type is flashing
(within 4 seconds), press the PTY.TI SEARCH
(PTY.TI) button again.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC kHz
MHz SLEEP
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC kHz
MHz SLEEP
● After the name of the selected programme type
has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
Note:
If the display has stopped flashing, start again from
step 4. If the unit could find out a desired programme
type you want, corresponding channel number will
flash for about 3 seconds, and then a station name
will flash for 7 seconds, and then remain lit.
● If you want to listen to same programmed type
of another station, press the PTY.TI SEARCH
(PTY.TI) button whilst the channel number or sta-
tion name is flashing. The unit will look for the
next station.
Note:
● If no station of the programme type you want can
be found, "NOT FOUND" will appear for 4 sec-
onds.
If you have selected the traffic programme:
If you select traffic programme (TP) as the pro-
gramme type in step 5, to receive only radio sta-
tions which broadcast traffic programmes, the TP
will appear. (However, this does not necessarily
mean that you will hear any traffic announcements
at that time.)
When a traffic announcement is actually being
made, the TA will appear.
(When both the TP and TA will appear, an an-
nouncement is being made.)
2,3
1
1
2,3
4,6
5
5
4,6
■ To recall stations that have been
stored in memory (PTY search)
You can search a desired stations by specifying the
programme type (news, sports, traffic programme,
etc. ... see page 18-19) from among the stations
that have been stored in memory.
(ASPM is convenient for storing stations in memory.)
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the
FM ST or FM band.
4
Press the PTY.TI SEARCH (PTY.TI) button.
● "PTY TI" and "SELECT" will appear alternately
for about 6 seconds.
5
Within 6 seconds, press the PRESET (
X
or
W
)
button to select the programme type you want.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC kHz
MHz SLEEP
● Each time the button is pressed, the programme
type will appear. If the button is held down for
more than 0.5 seconds, the programme type will
appear continuously.