beautypg.com

Handling fuel, Mixing fuel – Shindaiwa AH242 User Manual

Page 9

background image

9

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa

requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including,

but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel

lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain

up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood

alcohol) is

NOT approved.

2 Stroke Mixture Oil - A 2-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards

must be used. Shindaiwa One

TM

2-Stroke Oil is strongly recommended as it meets this standard and is specifically

formulated for use in all Shindaiwa 2-stroke engines. Engine problems due to inadequate lubrication caused by fail-

ure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

Mixing Fuel

For increased engine protection, Shindaiwa recommends using Shindaiwa Red Armor

TM

engine oil to protect the engine from

harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red Armor

TM

engine oil exceeds

ISO-L-EGD and J.A.S.O. M345/FD performance requirements.

Examples of 50:1 mixing quanti-

ties

IMPORTANT!

Shindaiwa One

TM

2-Stroke oil or Red Armor

TM

engine oil may be mixed at 50:1

ratio for application in all Shindaiwa engines sold in the past, regardless of ratio

specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days,

ninety (90) days when a fuel stabilizer is added. Use of unmixed, improperly

mixed, or stale fuel, may cause hard starting, poor performance, or severe engine

damage and void the product warranty. Read and follow instructions in the Long

Term Storage section of this manual.

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

• Use an approved fuel container.

• DO NOT smoke near fuel.

• DO NOT allow flames or sparks near fuel.

• Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

• NEVER refuel a unit when the engine is HOT or RUNNING!

• DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

• DO NOT overfill fuel tank. Wipe up spills immediately.

• Securely tighten fuel tank cap and close fuel container after refueling.

• Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

• Move at least 3m (10 ft.) from refueling location before starting the engine.

This manual is related to the following products: