SOYO SY-K7VTA User Manual

Page 47

Hardware Installation

SY-K7VTA

2-3.5 CMOS Clearing (JP5)

After you have turned off your computer, clear the CMOS memory by

momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then

restore JP5 to the initial 1-2 jumper setting in order to recover and retain

the default settings.

Jumper JP5 can be easily identified by its white colored cap.

CMOS

Clearing

Clear CMOS Data

Retain CMOS Data

JP5 Setting

Short pin 2-3 for
at least 5 seconds to
clear the CMOS

Short pin 1-2
to retain new
settings

Note: You must unplug the ATX power cable from the ATX power
connector when performing the CMOS Clear operation.

1 2 3