SOYO SY-K7VTA - Manual (Page 26)

Hardware Installation SY-K7VTA
22
2-3.1 CPU Installation
Your SY-K7VTA motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Socket 462 CPU
connector on the motherboard.
Mark your CPU Frequency: Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
FSB 100MHz (Athlon/Duron)
Athlon
750MHz (100 x 7.5) 800MHz (100 x 8.0) 850MHz (100 x 8.5) 900MHz (100 x 9.0)
950MHz (100 x 9.5) 1000MHz (100 x 10.0)
Duron
600MHz (100 x 6.0) 650MHz (100 x 6.5) 700MHz (100 x 7.0)
Follow these instructions to install your Socket 462 processor correctly.
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole
distinctive edge on the socket.