Star Trac FITNESS E-UBI - Manual (Page 5)

5
620-7991 Rev 002
B
EFORE
Y
OU
G
ET
S
TARTED
C
HECK
F
ACILITIES
P
REPAREDNESS
For a proper installation, please read this guide thoroughly and follow the instructions. Star Trac’s
goal is to help you have a successful and reliable installation, for this reason we have come up with
some helpful tips and check list to accomplish this goal.
E
QUIPMENT
L
AYOUT
Check to see that the equipment you will be adding the PVS to are placed where they will be used. It
is recommended that you follow your installation guides for each one of your Star Trac pieces of
equipment in making sure that there is ample space around them to ensure a safe and enjoyable
experience.
I
NPUT
S
IGNAL
In the world of entertainment today you have many choices. Star Trac recommends you know what
type of video signal (cable, analogue, digital, satellite, antenna) is in the club facility and if it has a
good signal. Don’t forget every installation is different. Check to see that you have a coaxial cable
connection at each location where a PVS will be installed.
C
ABLING
When Radio Frequency signals travel through cabling the signal will degrade over distance. Connec-
tors may degrade the signal as well. Check each output before connecting to your PVS and make
sure you have a clean strong signal to ensure an enjoyable experience. The Star Trac PVS requires
a minimum signal strength of 45dBmV for analogue channels, and 40% for digital channels. Your
club may require signal amplifiers to achieve a good strong signal. Star Trac recommends you use a
qualified installer for your Audio Visual needs.
E
LECTRICAL
R
ECEPTACLES
The Personal Viewing Screen requires a plug-in 60 watt power supply to operate (included). Check
with your club facility to ensure ample electrical receptacles are placed next to the equipment for a
safe and proper install. Check with your contractor to make sure you have enough power.