3 server chassis features – SUPER MICRO Computer 6015TC-10G User Manual
Page 13

Chapter 1: Introduction
1-5
1-3 Server Chassis Features
The following is a general outline of the main features of the SC808T-780 1U chas-
sis. Details on the chassis can be found in Chapter 6.
System Power
When confi gured as a SuperServer 6015TC-T/6015TC-10G, the SC808T-780 in-
cludes a single 780W cold-swap power supply, which provides the power to both
serverboards housed in the chassis.
SATA Subsystem
The SC808T-780 chassis was designed to support four SATA hard drives, which
are hot-swappable units.
Control Panel
The SC808T-780 features two independant control panels associated with each
serverboard in the chassis. Each control panel has LEDs to indicate power on, net-
work activity, hard disk drive activity and system overheat conditions. Each control
panel also includes a main power button and a system reset button.
Rear I/O Panel
The SC808T-780 is a 1U rackmount chassis. Its I/O panel provides a slots for two
low-profi le PCI-E x16 expansion cards, two COM ports, four USB ports, two VGA
ports and four Gb Ethernet ports. The 6015TC-10G also provides two 10 Gigabit
Ethernet ports. See Chapter 6 for details.
Cooling System
The SC808T-780 chassis has an innovative cooling design that features two sets
of triple (for a total of six) 4-cm high-performance fans. A fan speed control setting
in BIOS allows fan speed to be determined by system temperature.