Sun Microsystems Cisco MDS 9222i - Manual (Page 8)

6 Cisco MDS 9222i Switch and 18/4-port Module Hardware Release Notes • April 2008
■ Sun StorEdge™ 3510, 3511 FC arrays
■ Sun StorEdge 9910, 9960, 9970, 9980, 9985, and 9990
■ Sun StorEdge Fibre Channel 9840B/C, 9940B, T10K, LTO 3/4, SDLT 600, SDLT4
tape drives
■ Sun StorEdge FC420 FC-SCSI Bridge for L25 and L100 tape libraries with the SG-
XFCCARD2-C LVD SCSI to Fibre Channel Card Quantum or the SG-
XFC420CARD-MOD Fibre Channel / LVD Internal Bridge
■ Sun StorEdge T3B array with full fabric
■ Sun StorageTek™ 6140 and 6540 arrays
■ Sun StorageTek FlexLine™ 380 array
■ C4 tape library with the SG-XFCCARD2-C LVD SCSI to Fibre Channel Card
Quantum
■ FC Robots: L180/700/1400, SL500
Supported Host Bus Adapters
The MDS 9222i switch and MSM-18/4 module are compatible with the following
HBAs:
■ SG-XPCI2FC-QF2 and SG-XPCI2FC-QF2-Z
■ SG-XPCI1FC-QL2
■ SG-XPCI1FC-QLC and SG-XPCI1FC-QLC-Z (Maximum of two cascaded switches
between devices)
■ SG-XPCI1FC-EM2 and SG-XPCI2FC-EM2
■ SG-XPCI1FC-QF4 and SG-XPCI2FC-QF4
■ SG-XPCIE1FC-QF4 and SG-XPCIE2FC-QF4
■ SG-XPCI1FC-EM4-Z and SG-XPCI2FC-EM4-Z
■ SG-XPCIE1FC-EM4 and SG-XPCIE2FC-EM4
■ SG-XPCIE2FC-QB4-Z (Sun Blade™ 6000 & 8000 Modular System only)
■ SG-XPCIE2FC-EB4-Z (Sun Blade 6000 & 8000 Modular System only)
■ SG-PCIE20FC-NEM-Z (Sun Blade 8000 Modular System only)
Supported Server Platforms
The MDS 9222i switch and MSM-18/4 module are compatible with the following
Sun servers.