Spectrum Brands TELEMATRIX SP-400 - Manual (Page 16)

120V AC Outlet Recovery Power Adapter (provided)
The 120 VOLT AC OUTLET RECOVERY POWER ADAPTER is an featured TeleMatrix
product. It provides both the telephone lines and the power source in one cable (6P6C line
cord) and is designed to recover the use of the power outlet.
16
Power Adapter “LINE” Connection
The power adapter “LINE” connection is used to
connect the telephone line from the wall jack to
the power adapter. Using one of the 15 foot
modular telephone line cord, connect one end of
the cord to the RJ14 telephone ja ck on the wall or
base board. The remaining end of the cord plugs
into the “LINE” side of the power adapter.
Power Adapter “PHONE” Connection
The power adapter “PHONE” connection is used
to provide both the telephone lines and the
power source to the telephone. Using one of the
15 foot modular telephone line cord, plug one
end of the line cord into the back of the
telephone. Plug the remaining end to the power
adapter jack labeled “PHONE”.
Connector Configuration
The 120V Outlet Recovery Power Adapter has two (2) modular jacks. One jack is labeled “LINE”
and the other jack is labeled “PHONE”. These jacks allow for a fully modular installation.
L2 L1+L2
N E L _
E H N O P
OUT
ORDER SEPERATELY