Spectrum Brands TELEMATRIX SP-400 - Manual (Page 15)

Power Outlet Configuration
The SpectrumPLUS T M Series telephone requires external power from a standard 120V outlet (60Hz).
Caution
?
Never install telephone wiring during a lightning storm.
?
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
?
Never touch uninstalled telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
?
Use caution when installing or modifying telephone lines.
15
IMPORTANT!
The telephone will not function if the line cord connections are not correct. Be sure that the telephone line cord
connections are not reversed (“LINE”/”PHONE”). Attach the line cords to the power adapter and the wall before
connecting to the telephone. SpectrumPLUS TM Line Cords are 6-Pin 6-Conductor Line cords (6P6C line cord) .
Replacement Line Cords must be same.
!