Band selection b, Fast search, User group b – Siemens MC60 User Manual
Page 75
©
Sieme
ns
AG
2003, L:\MC6
0_Maguro\en\fug\_
von_
itl\M
C60_fug_EN_03
1009\MC
60_fug_EN
_0310
09_FM\MC60
_Se
tup.fm
left page (74)
of MC60 Maguro en, A31008-H5760-A1-1-7619 (21.10.2003, 14:59)
Setup
74
VAR Langua
ge: English; VA
R issue
da
te
: 1
6-Juli-
2003
Your service provider is displayed:
§List§
Display list of preferred
networks.
Create new entry:
• Select empty line, press
§Entry§
,
then select another entry from the
list of service providers and confirm.
Change/delete entry:
• Select entry, press
§Change§
, then
select another entry from the list
of service providers and confirm or
press
§Clear§
.
Band selection
b
Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, network
reconnection is speeded up (and
standby time is reduced).
§Menu§
¢
m
¢
Network
¢
Select function.
User group
b
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for example,
or special tariffs apply. The details
can be clarified with your service
provider.
Active
Activate/deactivate function. "User
group" must be deactivated for
normal phone use (phone code,
p. 14).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outgo. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred grp
If activated, only calls within this
standard user group can be made
(depending on the network
configuration).
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred
network is inadequate when you switch on
the phone, the phone may register in a
different network. This can change when
the telephone is next switched on or if
another network is selected manually.