Scion PT546-00081 - Manual (Page 31)

31
Editing the Text
The SETUP MENU will be displayed
when MENU is held down while the
power is in “OFF” position. Turn the
MULTI SELECTOR to select the
O.TTL (Opening Title). You can enter
the character at the flashing cursor
position. The character selection
method is described below.
1 Enter the character to PRESET1-3
and 6. Press the MULTI SELEC-
TOR up or down to select the
character, and press the MULTI
SELECTOR right or left to move
the cursor.
• PRESET1: Alphabet input (A-Z,
a-z)
Press the PRESET1 to switch
the alphabet to upper case or
lower case.
• PRESET2: Number, symbol (!”#
etc.)
• PRESET3: Space, Deletion
• PRESET6: Katakana input
(Katakana is a type of Japanese
character.)
Press the PRESET6 to switch
the katakana to upper case or
lower case.
2 After selecting the character,
press the MULTI SELECTOR right.
The cursor moves to the right, so
you can edit the next character.
(Maximum number of characters
for entry is 16.)
To choose and delete the charac-
ter or text, choose the character
with the cursor and then press the
PRESET3 to delete.
3 After character entry, press the
MULTI SELECTOR in the center
to register the text string.
If the cursor is positioned on the
16th character, press the MULTI
SELECTOR to the right to register
the whole text entered.
4 After text entry is completed, turn
the MULTI SELECTOR to select
OPEN. The selected text string is
registered as the Opening Screen.
The customize mode ends and the
registered text string is displayed
for 6 sec.
New Message Display
The next time the ACC is switched
on, the text edited by the user will be
displayed.
NOTICE
To avoid draining the battery,
do not leave the car audio on
longer than necessary when
the engine is not running.