Siemens MCM 1902 - Manual (Page 27)

Color monitor MCM 1902
A26361-K527-Z100-2-5E19 English - 19
Picture geometry is defective
Ê Set the picture geometry properly with the Picture correction/rotation button (see " Operation of
the monitor ").
Colors are impure
Ê Degauss the monitor with the OSD menu (see " Operation of the monitor ").
White does not look white
Ê Set the color temperature with the OSD menu (see " Operation of the monitor ").
Screen display has lines (Moiré), is dull or blurred
Ê Set the brightness and contrast with the controls (see " Operation of the monitor ").
Ê Degauss the monitor with the OSD menu (see " Operation of the monitor ").
Ê Adjust the moiré reduction function (see " Operation of the monitor ").
The screen display is flickering
Ê Set an ergonomic refresh rate (
≥
75 Hz) using the PC software (see documentation for your PC
or your screen controller/graphics card).
A muffled noise can be heard after switch-on
The monitor is degaussed every time you switch it on. This produces the noise. There is no
malfunction.