Sennheiser 504302 - Manual (Page 26)

25
Using the headset system
If a handset lifter/electronic hook switch is used, the call is automati-
cally accepted.
If no handset lifter/electronic hook switch is used:
̈
Accept the call by lifting the handset or by pressing the “accept call”
button on your fixed line phone.
Making a call
If a handset lifter/electronic hook switch is used:
̈
Dial the desired number.
̈
Put on the headset and establish a wireless link between headset and
base station (see page 23).
The phone connection is established automatically.
If no handset lifter/electronic hook switch is used:
̈
Put the headset on and establish a wireless link between headset and
base station (see page 23).
̈
Lift the handset and dial the desired number.
The phone connection is established.
If you receive a call and a handset lifter/electronic hook switch with
ring tone detection is used, you hear a ring tone in the headset and
the LED of the PHONE button
»
flashes white.