Sharp TINSZA625AWZZ User Manual

Page 9

09/11/03

CD-SW440N_EN.fm

E-8

Note:
This USB mass storage device or MP3 player is not compatible with MTP
and AAC file systems.

Note:
To pause playback:
Press the / (USB / ) button.

Notes:

●

SHARP will not be held liable for the loss of data while the USB
memory device is connected to the audio system.

●

This USB memory’s format supports FAT 16 or FAT 32.

●

SHARP cannot guarantee that all USB memory devices will work on
this audio system.

●

USB cable is not recommended for use in this audio system to
connect to USB memory device. Use of the USB cable will affect the
performance of this audio system.

●

This USB memory cannot be operated via USB hub or external HDD-
storage.

●

The USB terminal in this unit is not intended for a PC connection but
is used for music streaming with a USB memory device.

●

If unplayable file is played on this product, “NO SUPPORT” is
indicated.

●

This product relates to USB mass storage devices and MP3 players.
It may however face some irregularities due to various unforeseen
reasons from some devices. Should this happen, turn off the unit and
then turn it on again.

●

The USB port is only intended for direct connection to a USB memory
device without any cable.

●

Playback order for MP3 files may differ depending on the writing
software used during file download.

●

Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160
kbps.

●

Playlists are not supported on this unit.

●

This unit can display Folder Name or File Name up to 32 characters.

●

Folders with non playable files are also counted.

●

The display playback time may not be displayed correctly when
playing back a variable bitrate file.

●

The ID3TAG information supported are TITLE, ARTIST and ALBUM
only. Title name, artist name and album name can be displayed by
pressing the DISPLAY button during file playback or pause mode.

●

WMA meta tag also supports title, artist and album name which are
recorded in WMA files. Copyright protected WMA files cannot be
played back.

The following functions are the same as CD operations:

Page

Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Note:
If USB memory device is not connected, “NO MEDIA” will be shown on
the display.

Listening to USB mass storage device/MP3 player

Press the USB button on the remote control or FUNCTION button
repeatedly on main unit to select USB function. Connect the USB
memory device that has MP3/WMA format files on the unit. When the
USB memory is connected to the main unit, the device information
will be displayed.

Select desired file to be played back by pressing the

button.

Press the / (USB / ) button. Playback will start and the file
name will be displayed.

●

Title, Artist and Album name are displayed if they are recorded
in the USB memory device.

●

Display content can be changed by pressing the DISPLAY
button.

Press the FOLDER button, and press the TUNING (

) button

on the remote control to select desired playback folder. To start
playback with folder mode on, go to step 4. To change the playback
folder, press the TUNING (

) button on the remote control to

select another folder.

Select desired file to be played back by pressing the

button.

FUNCTION

AUDIO IN

PHONES

VOL

POWER

ON/STAND-BY

PUSH
OPEN

USB

TAPE

To playback USB/MP3 player with folder
mode off

To playback USB/MP3 player with folder
mode on

Press the / (USB / ) button. Playback will start and the file
name will be displayed.

●

Title, Artist and Album name are displayed if they are recorded
in the USB memory device.

●

Display content can be changed by pressing the DISPLAY
button.

Press the (USB ) button to stop playback.

Disconnect USB memory device from the USB terminal.

To remove USB memory device

This manual is related to the following products:

CD-SW440N