Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask - Manual (Page 9)

4-Way ScreenWall ElectriMask: Owner’s Manual 7
Unpacking and unrolling the screen
The viewing side of the projection screen is rolled to the inside to protect
the optical coating. The screen is rolled lengthwise.
1. Remove the screen from the cardboard shipping tube.
2. On a clean floor, unroll screen viewing side up.
3. Allow the paper to unroll between screen back and the floor. (This
will keep the screen clean.) See Figure 5.
Figure 5: Unrolling the screen
Caution
‹ Be careful not to touch or scratch the image surface
with fingernails.
‹ Do not use any tools to fasten the screen to the frame.
‹ Do not fold or crease the screen.