Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask - Manual (Page 11)

Connecting the spring tension cable
1. Locate the spring tension cables on either side of the unit.
2. Connect the baby eye snap to the eyelet on the lower bottom of
the unit. See Figure 7. You will need to pull the cable slightly
(about 10 lbs. / 4.5 kg of tension).
3. Repeat for the other side.
4-Way ScreenWall ElectriMask: Owner’s Manual 9
Eyelet
Baby Eye Snap
Spring
Tension Cable
Figure 7: Connecting the spring tension cable