Seiko 6M25 - Manual (Page 27)

English
27
● Non-water resistant
● Water resistant 5/10/15/20 bar
• If the watch becomes wet, have it
checked by an AUTHORIZED
SEIKO DEALER or SERVICE
CENTER.
• Before using in water, be sure the
crown is pushed in completely.
• Do not operate the crown and
buttons when the watch is wet or
in water.
If used in sea water, rinse the
watch in fresh water and dry it
completely.
• When taking a shower with a water resistant 5
bar watch, or taking a bath with a water resistant
10, 15 or 20 bar watch, be sure to observe the
following:
* Do not operate the crown or push the buttons
when the watch is wet with soapy water or
shampoo.
* If the watch is left in warm water, a slight
time loss or gain may be caused. This
condition, however, will be corrected when
the watch returns to normal temperature.
* Pressure in bar is a test pressure and
s h o u l d n o t b e c o n s i d e r e d a s
corresponding to actual diving depth
since swimming movement tends to
increase the pressure at a given
depth. Care should also be taken on
diving into water.
** We recommend that you wear a
SEIKO Diver’s Watch for scuba
diving.
■ TEMPERATURES
Temperatures over 60
°
C (140
°
F) or below
–10
°
C␣ (+14
°
F) may cause a slight time loss
or gain or battery leakage or shorten the
battery life.
However, the above conditions will be
corrected when the watch returns to normal
temperature.
5 bar WR
+60°C
-10°C
Your watch works with stable
accuracy within a temperature
range of 5
°
C and 35
°
C (41
°
F
and 95
°
F).
10/15/20
bar WR