Sharp R-21LC - Manual (Page 14)

13
CHECK
CHECK
NO. CHECK
CHECK
CHECK
NO. CHECK
CHECK
Set counter to "0" before using oven for the first
time. See next column.
To check count, touch each pad as indicated
below, after touching CHECK pad twice.
Count of memory Touch each number pad
of memory.
Count of manual Touch SELECTATIME
cooking pad.
Count of Express Touch EXPRESS
Defrost DEFROST pad.
Counter check
To check times used
You can check total times oven, each memory,
manual cooking and Express Defrost were used.
Total count Touch CHECK pad twice.
* Suppose you want to know total times oven and
memory pad 1 were used. In that case the oven
was used 8268 times and the memory 1 was
used 513 times.
To clear the number of times
Each number of times can be cleared by touching
SET pad during checking mode.
* Suppose you want to clear the times of
memory 1.
Procedure Display
After about 1 sec.
CHECK x 2
1 Touch CHECK pad 2
times.Total count will
be displayed.
2 Touch number pad 1
to check total times it
was used.
1
Note: 1. To cancel counter check, touch CHECK
pad.
2. To clear times of manual cooking, touch
SELECTATIME pad in Step 2 instead of
number pad.
3. To clear times of Express Defrost, touch
EXPRESS DEFROST pad in Step 2 in-
stead of number pad.
4. To clear total times used, skip Step 2.
1 Touch CHECK pad 2
times.Total count will
be displayed.
2 Touch number pad 1
to check total times it
was used.*
3 Touch SET pad.
Procedure Display
CHECK
x 2
1
After about 1 sec.
SET
Note: 1. To cancel counter check, touch CHECK
pad.
2. (FOR R-21LT)
You can know count of memory pads 1 -
10 only. Memory pads 11 - 20 cannot be
checked.
3. When the maximum count of 9999 is
reached, it will return to 0.