Samsung DTB-H260F - Manual (Page 13)

20
CHAPTER TWO
Remote Control and On-Screen Menus
2
21
CHAPTER TWO
Remote Control and On-Screen Menus
2
Using the On-screen Help
If you want to see the description of each selected menu, use the On-screen Help feature.
To turn the on-screen help on:
1
Press the MENU ( ) button on your remote control.
2
Use the / buttons to select the
Preference menu and press the
ENTER (
) button.
Use the / buttons to select Help
and press the
ENTER ( ) button.
3
Use the / buttons to select “On.”
Press the ENTER ( ) button and the on-screen help feature applies.
When you move the cursor using the / buttons, you can see the
description of each menu at the top of the On-Screen Menu.
To turn the on-screen help off:
Use the / buttons to select “Off” and press the ENTER (
) button.
The on-screen help disappears.
Handling On-Screen Menus
To go to the On-Screen Menu, press the MENU ( ) button. Using the
ARROW (///) buttons in the center of your remote control, you
can move between menus.
To enter a specific menu, press the
ENTER ( ) button. You can select a
menu or confirm a selected option using this button.
To go back to the previous menu from a sub-menu, press the
MENU ( )
button or select Return on the current menu screen.
To exit from the On-Screen Menu, press the
EXIT ( ) button.
Main-menu
Sub-menu
NOTE
The On-Screen Menu is displayed only when the COMPONENT jacks or HDMI jack on the rear of your
Set-Top Box are properly connected.
20-21 2006-10-12 ｿﾀﾈﾄ 1:13:37