Samsung DMR78 Series - Manual (Page 25)

troubleshooting _25
InformatIon codES
Information codes are displayed to help you better understand what is occurring with your dishwasher.
If occured the below codes, you should select the Cancle&Drain option and follow the below instruction.
COde SymbOl meANING SOlUTION
Thermistor error
Functional error. Insert detergent without loading
dishes, and run a cycle.
If the problem continues, disconnect the circuit
breaker and contact a service center.
Heater error
Heater error
Low water level error
Half load function error
Water supply error Check whether the water supply line is
connected correctly.
Check whether the water supply valve is closed,
the water supply is suspended or the water
inlet valve or line is frozen or clogged by foreign
particles.
If the problem continues, disconnect the circuit
breaker and contact a service center.
The temperature of the supplied
water is too high Check the temperature of the supplied water. If
it is higher than 176 ˚F (80 ˚C), a functional error
may occur with the dishwasher.
Drain error Check whether the drain hose is clogged or
folded. If the problem continues, disconnect the
circuit breaker and contact a service center.
Water level error (over-level) Functional error. Disconnect the circuit breaker
and contact a service center.
Leakage Functional error. Close the water supply valve
and disconnect the circuit breaker and contact a
service center.
Key pressed Functional error. Turn off the dishwasher and Use
a soft damp cloth on the control panel. (Refer to
the cleaning section.)
If the problem continues, disconnect the circuit
breaker and contact a service center.
For any codes not listed above, call 1-800-SAMSUNG(726-7864)
05 tr
oubleshooting
DMR78-00036A(XAA).indb 25 2009-09-11 �� 7:19:19