Sagem my405X - Manual (Page 7)

Description 7
Installing the SIM card and the battery
WARNING
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Ensure that your SIM card is a 3 V SIM type that is compatible with your phone. Inserting an incompatible card will be indicated
by a message when your phone is switched on. Contact your operator.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone's screen, type: *#06#.
The SIM card is inserted under the phone's battery. Ensure that the phone is switched off and the charger disconnected.
1 Turn the phone back and press lock button to unblock cover. Remove the back cover by sliding it downwards.
2 Take out battery if already installed.
3 Slide the SIM card, with cut corner as shown on the phone, into the card holder with fold face down.
4 Place the battery by positioning first the top of it, as shown on the battery.
Replace the back cover by sliding it then push the lower part into the lock position.
2
1 4 3
252614573_my405X_en.book Page 7 Mardi, 2. mai 2006 2:41 14