Sony MSW-M2000 - Manual (Page 123)

Chapter 9
Setup Menus
Chapter 9 Setup Menus
9-23
Menu items in the range 800 to 899, relating to audio control
(Continued)
Specify the time for cross-fade or fade in/out editing of audio signals.
5 ms, 10 ms , 15 ms, 20 ms, 25 ms
a) , 50 ms b) , 85 ms, 115 ms c)
Note
The cross-fade or fade in/out operation means that the recording is rewritten from
the OUT point for the length specified by this setting. Even at the minimum 5 ms
setting, a length of recording corresponding to a field is rewritten.
To avoid rewriting, set setup menu item 317 AUDIO EDIT MODE to “CUT”, but in
this case there is an audio discontinuity at the edit point. There is no effect on the
recorded video signal.
a) Cross-fade time is 24 ms.
b) Actual value is 49 ms.
c) Actual value is 114 ms.
Select the mode in which digital audio levels are displayed.
PEAK.0 : Displays the audio level as negative values with the maximum level set
to 0 dB.
REF.0: Displays the audio level as positive and negative values with the
reference level set to 0 dB.
Item number Item name Settings
802 DIGITAL AUDIO MUTE IN
SHUTTLE MODE Set the digital audio muting conditions during shuttle playback.
OFF : Not muted.
CUEUP: Muted during cue-up or preroll operations.
FULL: Muted in shuttle mode.
805 AUDIO MONITOR
OUTPUT MIXING Select the audio mixing method used for digital audio signals and Betacam
playback analog audio signals supplied to the MONITOR OUTPUT connector.
ADD: Simple addition
RMS : Root-mean-square
AVE: Simple average
806 LEVEL METER SCALE
803 DIGITAL AUDIO FADE
TIME
801 DIGITAL JOG SOUND Turns the digital jog sound on and off.
OFF: Digital jog sound is turned off.
Audio signals of digital channels for which speed compensation has not been
conducted are output even in still picture mode.
ON : Digital jog sound is turned on.