Sharp UX-A260 - Manual (Page 52)

Sending a Fax by Automatic Dialing
50
♦
To enter a lower case letter, continue pressing the key for the letter until the
lower case letter appears. To enter one of the following symbols, press or
repeatedly: . / ! " # $ % & ’ ( ) + + , - : ; < = > ? @ [ ¥ ] ^ _ ' { | } ) (
6
Press .
If you selected a Speed Dial number in Step 2, the display will briefly
show STORED, and then . Go to Step 7.
If you did not select a Speed Dial number in Step 2, the display will show
the next available Speed Dial number. If that number is acceptable,
press and go to Step 7. If not, enter the desired two digit
number, press , and go to Step 7.
7
Return to Step 2 to store another number, or press to return to
the date and time display.
START/MEMORY
START/MEMORY
START/MEMORY
STOP
Note: The fax machine uses a lithium battery to keep automatic dialing numbers
and other programmed information in memory when the power is turned off.
Battery power is consumed primarily when the power is off. With the power kept
continuously off, the life of the battery is about 5 years. If the battery dies, have
your dealer or retailer replace it. Do not try to replace it yourself.
Editing and clearing auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
Press once and once.
2
Enter the 2-digit Speed Dial number that you wish to edit or clear (for
example, press for Speed Dial 01), or press or until
the number you wish to edit or clear appears in the display.
3
Press .
FUNCTION
0 1
Display:
1=EDIT, 2=CLEAR