Sharp UX-A260 - Manual (Page 31)

Optional Answering System Settings
29
2. Ans
w
er
ing
Mac
h
ine
1
Press once and once.
2
Press once and once.
3
Press .
4
Press a number from 1 to 4 to select the desired ICM recording time.
5
Press to return to the date and time display.
15 seconds 60 seconds
30 seconds 4 minutes
FUNCTION
STOP
Optional Answering System Settings
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you on
the built-in answering system. The answering system is set at the factory to
allow each caller a maximum of 4 minutes to leave a message. If desired, you
can change this setting to 15, 30, or 60 seconds.
Display:
T.A.D. SETTING
RECORDING TIME
1
2
3
4
The display briefly shows
your selection, then:
REMOTE CODE
FAX mode on TAD failure
If the memory for recording incoming messages becomes full while you are
out, the answering system will no longer be able to record messages. The ON
TAD FAILURE setting is used to select whether or not the reception mode will
switch to FAX mode when this happens:
♦
YES (switch to FAX mode): The reception mode will switch to FAX mode,
allowing the machine to continue to receive faxes automatically. With this
setting, you can still use the remote commands to listen to your messages
and then erase them (see
Remote Operations on page 37).