Smeg LBS 107 - Manual (Page 6)

6 - EN
• Delicates
You can wash your delicate clothes on this
program. It has more sensitive washing
movements and does not make intermediate
spinning compared to “Synthetic” program.
• Daily
You can use this program to wash cottons
and synthetics together. There is no need to
sort them.
• Eco Synthetics
This program is suitable for clothes that
are normally worn for a short time such as
sportswear. It is used to quickly wash a small
amount of cotton/synthetic blended clothes.
• Eco
This program washes for a longer period
at 40°C and gives the same result as the
“Cottons 60°C” program, thus it saves energy.
It is suitable for clothes for which you cannot
use the “Cottons 60°C” program.
• Quick
This program is used to quickly wash (30
minutes) a small amount of lightly soiled cotton
garments.
• Intensive
Increased hygiene is provided by a longer
heating period and an additional rinse cycle. It
is recommended for baby clothes and clothes
worn by allergic people.
• Hand Wash
You can wash your woolen/delicate clothes
that bear “not machine- washable” labels for
which hand wash is recommended on this
program. It washes the laundry with very
tender washing movements without damaging
your clothes.
C
Sort the laundry according to type of fabric,
color, degree of soiling and permissible
water temperature when choosing a
program.
Special programs
For specific applications, you can select any of
the following programs:
• Rinse
This program is used when you want to rinse
or starch separately.
• Spin & Drain
This program is used to apply an additional
spin cycle for the laundry or to drain the water
in the machine.
Before starting this program, select the
desired spin sped and press “Start/Pause/
Cancel” button. Your machine drains the water
after spinning at the set spin speed.
If you only want to drain the water without
spinning your laundry, select “Spin and Pump”
program, and then select no spin function
with spin speed selection button. Press “Start/
Pause/Cancel” button.
A
You should use a lower spin speed for
delicate laundries.
Spin Speed selection
Whenever a new program is selected, the
maximum spin speed of the selected program
is displayed on the spin speed indicator.
To decrease the spin speed, press the “Spin”
button. Spin speed decreases gradually. Then,
rinse hold and no spin options are shown
respectively.
Rinse hold is shown with “ ” and no spin is
shown with “ ” symbols.
If you do not want to unload your clothes
immediately after the program, you may
use rinse hold function in order to prevent
your clothes become wrinkled in anhydrous
conditions. With this function, your laundry is
kept in the final rinsing water. If you want to
spin your laundry that you left in water:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machine drains the
water and spins your laundry.
You can use no spin function in order to drain
the water without spinning at the end of the
program.