SECO-LARM USA NVD Bullet Cameras EV-1626-NKGQ 2.8~12mm - Manual (Page 9)

On-Screen Display Manual
9 SECO-LARM U.S.A., Inc.
 D-WDR (Digital Wide Dynamic Range):
A. Select D-WDR using the UP and DOWN
buttons on the EXPOSURE menu screen.
B. Select the desired feature by using the
LEFT and RIGHT buttons.
D-WDR : When there are both bright
and dark image areas, D-WDR makes
both of them distinct. User can
choose between OUTDOOR and
INDOOR settings.
OFF: Disable D-WDR function.
RETURN: Save changes in the
EXPOSURE menu and return to the
SETUP menu.
White Balance:
The White Balance function is used to control the on-screen colors.
1. Select WHITE BAL on the SETUP screen using
the UP and DOWN buttons.
2. Select the desired mode using the LEFT and
RIGHT buttons.
 There are four White Balance settings available:
A. ATW (Auto Tracking White Balance):
Normal setting. The color temperature
range is from 1,800°~10,500° K. (Ex: A
fluorescent lamp or outdoors.)
B. AWB : The White Balance is
automatically adjusted to a specific
environment.
C. AWCSET: To obtain the best results,
press the SET button while the camera is
focused on white paper. If the
environment and/or light source changes,
the White Balance will require re-
adjustment.
D. MANUAL: Used for fine adjustment of
White Balance. Set White Balance using
ATW or AWC, then change to MANUAL
and press the SET UP button. Increase
or decrease the value of R-Gain (Red)
and B-Gain (Blue) while monitoring the
color of the image.
SENSE-UP