SECO-LARM USA NVD Bullet Cameras EV-1626-NKGQ 2.8~12mm - Manual (Page 11)

On-Screen Display Manual
11 SECO-LARM U.S.A., Inc.
Special:
1. Select SPECIAL by using the UP and
DOWN buttons.
2. Select one of the modes by using the UP
and DOWN buttons.
 CAM TITLE: When input, the Camera ID
is displayed on the monitor.
A. Move the arrow indicator to
CAMERA ID using the UP and
DOWN buttons on the SETUP menu
screen.
B. Select ON using the LEFT and
RIGHT buttons.
When CAM TITLE is set to OFF, the camera title is not displayed on the monitor.
C. Press the SET UP button.
D. The camera title can be up to 15
alphanumeric characters in length.
Move the cursor to choose a
character.
Select the desired character by
pressing the SET UP button. The
cursor will move to the next
position.
Repeat the above until the camera
title has been created.
Note:
If the wrong camera title has been input, move the cursor to CLR and press the
SET UP button to erase characters.
Note: