Charging the battery pack – Sanyo DUAL CAMERA VPC-PD1TA User Manual
Page 6
v
English
Charging the battery pack
1
Press the ON/OFF button to turn off the camera.
h It is not possible to charge the battery pack while the camera is on.
2
Use the dedicated USB interface cable (supplied) to connect the
camera to a computer.
3
Turn on the computer.
h Charging begins.
h During charging, the multi-indicator is lit red.
h When charging is completed, the indicator turns off.
h The charging time is approx. 180 minutes.
2 Pull out
2 Pull out
1 Push in
1 Press
To USB terminal
Supplied dedicated USB interface cable
To USB connector on the computer
Computer power switch
• ON
Camera on/off switch
• OFF
Multi-indicator
Push
This manual is related to the following products: