Sagem myC-1 - Manual (Page 35)

34
Calls
Authorising double call
(Service depending on the operator)
During a call, a special tone can inform you that
another caller is trying to reach you. The caller’s
number - and name, if stored - is displayed on the
screen.
During a call, when pressing the central key, the left
key changes function and gives access to different
possibilities of actions with this call.
Configuring automatic redial
You can activate automatic redial either by default or
on demand.
Blacklist
The blacklist is used to limit failures on automatic
calls (calls generated by the automatic redial
function).
When several automatic calls failed with a number
(number busy or unknown), this number is put in the
blacklist and no automatic call will be done with this
number any more until you delete it from the
blacklist.
Note: this function does not apply to the calls
performed manually.
Call waiting
You can activate, deactivate and view
the status of the call waiting service in
order to check whether it is active or
not.
myC-1_en_06Calls.pmd 22/12/2003, 16:17 34