Sagem myC-1 - Manual (Page 16)

15
Getting started
Switching on/switching off,
starting up
To switch on your phone:
Press to switch on your phone.
If access to the SIM card is protected by a secret
code, the phone will ask you to enter your PIN code.
PIN code
This is the personal code for your SIM card. You may
be asked to enter this code when the instruction: Pin
number? appears after you switch on your phone.
Enter the code of between 4 and 8 digits given to you
by your operator. These digits will not be displayed
on the screen for security reasons.
Press # or OK or on right key to confirm.
Setting Time and Date
The first time the phone is used, the time and date
will need to be set.
If the battery has completely run down or been taken
out, you will be asked to confirm the time and date.
Setting the time
Set the time either by typing it in or by using the
scrolling arrows to alter the numbers already
displayed.
Warning
If the wrong PIN code is entered three
times in a row, the card will be locked.
To unlock your card:
- enter **05*
- enter the PUK code (Personal
Unlocking Key) provided by your
Network Operator and confirm,
- enter your PIN code and confirm,
- enter your PIN code again and
confirm.
After 5 or 10 times (depending on SIM
card type), the SIM card will be
permanently locked. Contact your
Operator or your Service Provider to
obtain a new card.
Control of the PIN code
If your phone displays SIM absent,
press
(long press) to switch off your
phone and check that your SIM card is
correctly positioned.
myC-1_en_02Getting started.pmd 22/12/2003, 16:19 15