Select Comfort U 3000 - Manual (Page 12)

Foundation
Frequently
Asked Questions
Make sure the letter on the center support beam matches the side rail.
For example, the end of the center beam labeled “a” should connect
to the side rail with the “a” on it. additional force may be required. What if I can’t get my
center support beams
flush with the side rails?
How can I get my pins
in all the way? all pins are wider at one end and narrower at the other end. Make
sure the “T” end is up and the narrow end goes into the side rail first.
you may need to use a bit of force to get it in place.
What can I do if I can’t
get the deck panels to
lay flat? First, make sure all the pins and beams are flush. Then, set the deck
panel over the notches. you should then be able to slide the panel
into place.
Where is the hardware
for the footboard and
headboard brackets? The same hardware for attaching the legs to the foundation is used for
attaching the brackets. align the bracket with the holes for the leg bolts.
attach the leg per the instructions.
10 11
If you still have questions or need assistance, look for answers on our Web site
sleepnumber.com or please call Customer Service at 1.800.472.7185