Stanton C.324 - Manual (Page 11)

Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215.9*279.4mm Pages 12
11
JOG WHEEL SENSITIVITY
The touch sensitivity of the jog wheel can be adjusted to fit the needs and
feel of different users. When adjusting the sensitivity, be conscious of
extreme settings which may affect your performance. Setting the
sensitivity too high would engage the touch sensitivity with the hand just
above the wheel. Setting the sensitivity too low may not engage the touch
even while pressing firmly on the wheel.
To adjust the jog wheel touch sensitivity, press and hold the PITCH
LOCK button while turning either encoder. Release PITCH LOCK
when done. Wait at least 3 seconds before powering off the unit.
FACTORY SETTINGS
To return to factory settings…
Power off the unit.
Press and hold the CLEAR button as you power up the unit.
When the display reads clear ALL, release the CLEAR button.
WARNING: Restoring factory settings will delete cue point memory.
SLEEP
The C.324 will automatically go into sleep mode after 15 minutes of
inactivity. Press either the PLAY or CUE button to wake it up.
FADER START
By connecting the CD player to a mixing board that has the fader start
feature, the crossfader will engage playback or cue mode depending on its
location. If the CD player is connected to the left side of the crossfader,
playback will start once the fader is moved from the left most position
towards the right. The CD player will re-cue itself when the crossfader is
brought back to the left most position. Two CD players can be hooked up
in this fashion to work on both sides of the crossfader.
RELAY PLAY USING TWO PLAYERS
When both CD players are connected to each other via their FADER
START/RELAY jacks, the players can work in unison by playing tracks one
after another from both units.
Set both players to single play mode (the SINGLE indicator will be
illuminated in the LCD displays).
Begin playback on the first player.
When the first track ends, playback will automatically start on the
second player and the first player will automatically enter standby
mode.
When the track on the second player ends, the first player will play the
next track. The players will continue to perform continuous relay play
until stopped or until the last track is played.
You can set a cue point on the standby player to jump directly to that
point.
Warranty
Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or
replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in
material or workmanship for a period of one year following the date of original purchase. Exceptions to this warranty are as noted below:
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier of either thirty (30) days following the date of original purchase
or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of misuse,
alteration, normal wear, or accident are not covered under this warranty.
Returns
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair or replacement
must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and in the same country
where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the authorized Stanton
dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton dealer in the
country where the purchaser is located or the country in which the merchandise was received. Any returns to a non-authorized dealer or to an authorized
Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized Stanton
dealer’s return policy.
Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise.
Stanton’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the
merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any special, incidental or
consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Stanton or otherwise.
To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of merchantability or fitness
for a particular purpose.
The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and country to
country.
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written explanation
with the merchandise when returned pursuant to the terms and conditions set forth herein.
Please register your product online at www.stantondj.com
OPERATING INSTRUCTIONS
WARRANTY & RETURN POLICY