Sony KV-30HS510 User Manual
Page 24
23
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ...
Do This ...
Watch the VCR
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Watch cable channels
Press
TV/VIDEO
repeatedly to select the cable input (VHF/UHF in the
illustration).
Set up the TV remote control
to operate the VCR
If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 43-44.
Activate the TV remote
control to operate the VCR
Open the outside cover, as shown on page 42. Then set the A/V slide switch
to the position you programmed for the VCR.
Control VCR functions with
the TV remote control
See “Operating a VCR” on page 62.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page 78.
34XBR.book Page 23 Friday, February 7, 2003 4:03 PM