Stinger MC POWER SYSTEM MC2 - Manual (Page 43)

MC 2 Power Systems User's Guide Chapter 7: Troubleshooting
1110227 Revision 2
November 2006 31
4 Remove the stabilizer plates and separate power system enclosures.
5 Wait 30 seconds.
6 Follow the steps listed in the MC
2
Power System Series 26 Amp-Hour topic
“ Preparing Your MC² Power System for Operation ”.
7 Reconnect devices.
8 Plug in to charge until the fully charged notification light has illuminated.
If you continue to experience problems with the power system, discontinue use of the
system and contact the Stinger Medical C.A.R.E. department.